Doro HandleEasy 326GSM Manuel D'installation page 14

Masquer les pouces Voir aussi pour HandleEasy 326GSM:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

English
Installation
Always ensure that the telephone is turned off
before the battery cover is removed.
Charging
Connect the mains adapter to the wall socket
and the socket on the telephone. Charge the
telephone for 24 hours the first time.
Battery
As batteries only have a certain lifespan it is
quite normal that call time and standby time
will decrease somewhat compared to the
specifications when the telephone is used
regularly. Fully-charged batteries (5 hours
charging) will last for approx 160 hours standby
time or approx 140 minutes call time. These times
apply at normal room temperature. Full battery
capacity will not be reached until the batteries
have been charged 4-5 times. The telephone has
an automatic charging mechanism that prevents
the batteries from being overcharged or damaged
due to prolonged charging.
When the battery is running low,
is
displayed and a warning signal will be heard.
Warning!
Only use batteries, charger and accessories that have been
approved for use with this particular model.


Publicité

Table des Matières
loading

Table des Matières