Models 1400, 1442, 1442E, 1444, 1444E
PowerLuber Grease Gun
Any other use not in accordance with instruc-
tions will result in loss of claim for warranty or
liability.
Service
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel may result in
a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of un-
authorized parts or failure to follow Maintenance
Instructions may create a risk of shock or injury.
SPECIFICATIONS
Basic PowerLuber Model 1400
Operating Power, Volt
Maximum Operating Pressure, PSI (bar)
- Low Output -
- High Output -
Grease Reservoir Capacity, oz. (g)
Operating Temperature Range, °F (°C) 0 to 122
Operating Current, Amp
Rated Current, Amp
Lubricant (Grease)
Grease output oz./min. (gram/min)
- Low Output (L)
- High Output (H)
Weight, Lbs. (Kg)
Accessories:
Battery NiCd Model 1401
Output, VDC
Capacity, mAh
Battery Charger Model 1410
Charge time
Input, VAC (2.0 A)
Battery Charger Model 1410E
Charge time
Input, VAC (2.0 A)
Outlet Hose Model 1230
Pressure Rating, psi (Bar)
Length of the Hose, In (mm)
NOTE: Operating current and grease output data at 1,000
PSI (69 bar).
Page Number - 4
Extreme pressure may cause nozzle
extension or whip hose to burst. Use only
Lincoln APPROVED hoses and follow whip
hose instructions and warnings.
TOOL USE AND CARE
Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is
dangerous and must be repaired.
Do not continue to hold down trigger if grease
gun is stalled. This could damage the motor or
cause fire.
Disconnect battery pack from tool before making
any adjustments, changing accessories, or stor-
ing the tool. Such preventive safety measures
14.4
reduce the risk of starting the tool accidentally.
7,000 (482)
3,000 (206)
Store the tools out of reach of children and other
14.5 (411)
untrained persons. Tools are dangerous in the
hands of untrained users.
(-18 to +50)
4.0
When battery pack is not in use, keep it away
5.0
from other metal objects like: paper clips, coins,
Up to NLGI #2
keys, nails, screws, or other small metal objects
3.8 (108)
that can make a connection from one terminal to
8.5 (241)
another. Shorting the battery terminals together
8.0 (3.6)
may cause sparks, burns, or a fire.
Maintain tools with care. Check for misalignment
14.4
or binding of moving parts, breakage of parts,
1700
and any other condition that may affect the tool's
1 Hour
operation. If damaged, have the tool serviced
120 V, 50-60 Hz
before using. Many accidents are caused by
poorly maintained tools.
1 Hour
230 V, 50 Hz
Use only accessories that are recommended by
Lincoln.
7,500 (510)
30 (760)
Only accessories that are capable of handling
7000 PSI (482 bar) should be used. Accessories
that may be suitable for one tool may create a
risk of injury when used on another tool.
Appropriate use
The PowerLuber was exclusively designed to
pump and dispense lubricant using 14.4 volt bat-
tery power. The maximum specification ratings
should not be exceeded.
Sales Model Basic PowerLuber Battery Charger
1442
1442E
1444
1444E
Models and Components
1400
1401
1400
1401
1410E
1400
1401(2) 1410
1400
1401(2) 1410E
Form 404088
Case
1410
286135
286135
286135
286135