Using The Channel Setup Menu; Auto Program - Sony TRINITRON KV-13FS100 Instructions De Service

Operating Instructions
Using the Channel Setup
To access the Channel Setup menu, refer to the following steps:
To Display
To Highlight
MENU MENU
Favorite
Press
Channels
1 Use the
Quick access
a favorite channel, then press
to favorite
2 Using the
channels
3 Press
4 Press


To use Favorite Channels: Exit all menus and press
the desired channel number and press
On: Select if you are receiving cable channels with a CATV cable.
Cable
Off: Select if you are using a TV antenna.


After changing your cable settings, you will need to perform Auto Program. When
Channel Fix is set, you will not be able to use your Cable settings.
2-6: Select when you want to control all channel selection through a cable
Channel Fix
box or VCR. Select the appropriate channel (usually 3 or 4) and use the
cable box's or VCR's remote control for channel selection.
Video 1: Select from available video inputs when you have connected
video equipment (e.g. satellite receiver) and you want your TV fixed to it.
Off: Channel Fix is not set.

Auto Program

Press
The TV will scan through all available channels and program receivable
channels.
20
To Select
g
to open the Favorite Channels menu:
F f
or buttons to select the position (1-5) where you want to set
F f
or button, select the desired channel.
to change to the channel selected.
G
to return to the Channel Setup menu or press
g
to perform Auto Program.
Menu
Channel Setup
Favorite Channels
Cable : On
Channel Fix : Off
Auto Program
Channel Skip/Add
Channel Label
Move
.
. Press F or f to move the cursor to
.
Select End
to exit.