Cleaning And Storage - Honeywell HY-033 Mode D'emploi

CLEANING AND STORAGE

• Unplug the fan before cleaning.
• Use only a soft, damp cloth to gently wipe the fan clean.
• DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
• DO NOT use gasoline, paint thinner or other chemicals to clean the
fan.
REMOVAL OF THE FRONT GRILLE FOR CLEANING
DO NOT remove the fan grille unless the power is turned
off and the power cord is unplugged.
• Remove the Front Grille by locating the 3 screws on the back of
the fan head. (Fig. 5)
• Unscrew the screws using a standard phillip head (
driver.
NOTE: The screws will remain attached to the rear housing to ensure
they are not lost. Do not try to force the removal of the screws.
• Pull the front grill away from the front housing. (Fig. 6)
• Gently wipe the Fan Blade and grilles with a cloth. DO NOT
IMMERSE THE FAN IN WATER AND NEVER ALLOW WATER TO DRIP
INTO THE MOTOR HOUSING. DO NOT USE GASOLINE, PAINT
THINNER, OR OTHER CHEMICALS TO CLEAN THE FAN.
• Re-assemble the fan by aligning the 3 screw bosses with front grille and fan body.
• For storage, clean the fan carefully as instructed. Cover the product to protect is from it from dust. Store
the fan in a cool, dry place.
) screw-
Fig. 5
Fig. 6