Bosch GLM 15 Consignes D'utilisation/De Sécurité page 7

The use of optical instruments
with this product will increase
eye hazards.
Have the measuring tool
repaired only through qualified
specialist using original spare
parts. This ensures that the safety
of the measuring tool is maintained.
Do not allow children to use
the measuring tool without
supervision.
unintentionally blind other persons.
Do not point the laser beam
at persons or animals and do
Safe Operating Procedures
Be sure to read and understand
all instructions in this manual
before using this product.
Failure to follow all instructions
may result in hazardous radiation
exposure, electric shock, fire, and/
or bodily injury.
Use of controls or adjustments
or performance of procedures
other than those specified
in this manual, may result in
hazardous radiation exposure.
The use of optical instruments
with this product will increase
eye hazard.
ALWAYS: Make sure that any
bystanders in the vicinity of use
are made aware of the dangers
of looking directly into the
measuring tool.
DO NOT remove or deface
any warning or caution labels.
not look into the laser beam
yourself, not even from a large
distance.
Do not use the laser viewing
glasses as safety goggles. The
laser viewing glasses are used for
improved visualization of the laser
beam, but they do not protect
against laser radiation.
Do not use the laser viewing
glasses as sun glasses or
They could
in traffic. The laser viewing
glasses do not afford complete
UV protection and reduce color
perception.
Removing labels increases
the risk of exposure to laser
radiation.
DO NOT stare directly at the
laser beam or project the laser
beam directly into the eyes of
others. Serious eye injury could
result.
DO NOT place the measuring
tool in a position that may
cause anyone to stare into
the laser beam intentionally or
unintentionally. Serious eye injury
could result.
DO NOT use any optical tools
such as, but not limited to,
telescopes or transits to view
the laser beam. Serious eye injury
could result.
ALWAYS remove the batteries
when cleaning the laser light
aperture to laser lens.
-7-