Hoover MAXLIFE Guide D'utilisation page 13

Maintenance
Cleaning & Maintaining the Brush Roll
CAUTION
To reduce the risk of injury from moving parts, unplug before servicing.
LUBRICATION: The motor and brush roll are
equipped with bearings which contain sufficient
lubrication for their lifetime. The addition of
lubrication could cause damage. Do not add
lubricant to motor or brush roll.
Lower the handle to the reclined
position, and flip the vacuum over.
To access the brush roll, unscrew the
nozzle guard from the nozzle.
1
Remove any hair or blockages.
3
TIP: Rotate the brush roll manually to ensure the belt is properly installed.
Remove the brush roll by pulling it
up and out from the vacuum belt.
2
Replace the brush roll and nozzle
guard. Secure with screws.
4
13