How To Adjust Names; How To Set The Lock Function; Input Sensitivity; Headphone For Monitoring - Beyerdynamic IMS 900 Notice D'utilisation

1.4.10 How to adjust Names

a) Press the up or down button until the LC-Display will show NAME.
b) Press the right or left button. The LC-Display will start to flash.
c) Press the up or down button to select letters or numbers.
d) Press the right or left button to jump to the next character. At maximum you can enter six
letters/numbers.

1.4.11 How to set the Lock Function

a) Press the up or down button until the LC-Display will show LOCK.
b) Press the left button. The display will show that the lock function is switched on: LOCK ON. All
settings are now locked. No more settings can be made (except unlock) until the function is set
to unlock.
c) To unlock press the right button until the display shows LOCK OFF. Further adjustments are now
possible.

1.4.12 Input Sensitivity

a) Press the up or down button until the LC-Display will show INPUT SENSITIVITY.
b) Press the right or left button. The LC-Display will start to flash.
c) With the left button the input sensitivity is set to LOW, with the right button to HIGH.
d) Press the up or down button to store the setting.
1.5

Headphone for Monitoring

Connect a stereo headphone to the headphone socket (2). Adjust the desired headphone volume
with the volume control (3). Make sure that the headphone is equipped with a stereo plug.

Important:

Adjust the headphone level to suit your needs and do not overdrive the headphone. The system will
save and update the current setting automatically within 5 seconds after the last adjustment if no
other button has been pressed in the meantime.
30