Pairing With A Bluetooth Device - ION Total PA Spartan Guide D'utilisation

Operation
Automatic Power Shut-Off
TM
Total PA Spartan is equipped with an automatic power shut-off to save energy in compliance with
the energy efficiency regulations for compact audio products. Total PA
saving mode after 15 minutes of inactivity unless an audio signal at a moderate level is detected from
the XLR Input, the Aux Input, the USB/SD media player, the Radio, or a Bluetooth connection. In
energy-saving mode, the display and lights will turn off and audio playback will be disabled, but the
unit will remain powered on in standby.
To resume normal operation, simply use the Power Switch to turn the unit off and then back on.
To prevent automatic shut-off, an audio signal should remain active at a moderate volume level
from the XLR Input, the Aux Input, the USB/SD media player, the Radio, or a Bluetooth
connection. We recommend setting audio source (i.e., Aux Input or Bluetooth) volume at max and the
Master Volume to 5 or higher to prevent shut-off.

Pairing with a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on Total PA
3. Use the Mode button to select Bluetooth as the audio source, which appears as "bt" in the
display. Total PA
devices. You will know you are in pairing mode when the Bluetooth icon is flashing. In addition,
automatic voice prompts from the speaker will alert you of the device's status: Bluetooth
Pairing, Bluetooth Connected, or Bluetooth Disconnected.
4. Navigate to your Bluetooth device's setup screen, find Total PA Spartan, and connect. The
Bluetooth icon will remain solidly lit.
Note: Users should consider updating their device's OS if experiencing trouble with pairing or
playing music.
5. To disconnect pairing, turn off Bluetooth on your device or select Forget this device on your
Bluetooth device's setup screen.1
If you would like to disable (or enable) the voice prompts, press and hold the Play/Pause button.
Note: Bluetooth must be selected as the audio source in order to disable (or enable) the voice
prompts.
TM
Spartan.
TM
Spartan will automatically go into pairing mode to search for Bluetooth
TM
Spartan will enter an energy-
7