ION Total PA Spartan Guide D'utilisation page 6

7. Play/Pause: When USB/SD or Bluetooth is selected as the audio source, plays/pauses audio.
Note: Files are played from the USB or SD source first by alphabetical order of what is on the root level,
then alphabetical by folder, and then alphabetical by the track name.
8. Repeat Button: Press to cycle through four options: repeat all of the tracks (ALL), repeat all of the
tracks in the folder (FOLd), repeat the current playing USB or SD track (OnE), or shuffle the track order
(rAn). Press and hold this button to link your speaker to another Total PA
Linking Two Speakers
9. Mode: Switches the audio source between USB/SD, FM radio, and Bluetooth.
10. Light Mode Button: Press this button to toggle between five modes for the lights on the front panel:
•
Color Wheel: The lights spin on and around the woofer.
•
Color Wheel Beat Sync: The lights spin on and around the woofer according to the tempo of the
music playing.
•
Color Cycle: The lights steadily cycle th rough different colors.
•
Beat Sync: The lights flash and change colors according to the tempo of the music playing.
•
Off: The lights turn off.
11. Mic Input (1/4" / 6.35 mm & XLR): Connect a dynamic microphone to the 1/4" (6.35 mm) or XLR inputs.
Control the volume of the input using the Control Knob.
12. Aux Input (1/8" / 3.5 mm): Connect a CD player, digital media player, or other audio source to this 1/8"
(3.5 mm) stereo auxiliary input. Adjust the volume using the Control Knob.
13. XLR Input (XLR): Connect a line-level mixer or musical instrument to this XLR line-level input. Use this line-
level input when linking together two Total PA
14. Mix Out (XLR): Connect this XLR output to another active (powered) speaker.
15. PWR (Power) LED: Indicates whether Total PA
16. Clip LED: This LED will flash red if the signal from the inputs or media panel source is clipping. If this
happens, decrease the setting of the Main Volume, Source Volume, or Mic Volume.
17. Power Cable Input (IEC): Insert the included power cable here to power the unit.
18. Fuse Holder: If the unit's fuse is broken, remove the Fuse Holder and replace the broken fuse with one
that has the correct rating (as indicated on the Fuse Holder). Using a fuse with an incorrect rating can
damage the unit and/or fuse.
19. Power Switch: Turns Total PA
6
for more information.
TM
TM
Spartan on or off.
Spartan units.
TM
Spartan is powered on or off.
TM
Spartan. See Operation >