ETI GROW ELITE GL-250-MV Guide D'utilisation Et D'entretien page 5

installation (continued)
3
Adjusting the length of the
mounting cable
□ Adjust the length of
the mounting cable
(BB) by lifting the
metal lever on the
side of the pulley
and pulling the short
side of the cable
downward from the
pulley.
□ Repeat with the other
mounting cable (BB).
BB
5
Attaching the mounting cables
to the V hooks
□ Attach the carabiner
at the bottom of the
mounting cable (BB)
to the V hook (AA).
□ Repeat this step on
the other side of the
fixture.
Carabiner
AA
Pulley
Metal Lever
Pulley
4
Attaching
the mounting
cable to the
ceiling
□ Attach the carabiner
at the pulley end of
the mounting cable
(BB) to the hook screw
(not included) that has
been installed on the
ceiling.
□ Repeat with the other
mounting cable (BB).
6
Attaching the light fixture to the V hooks
□ Slide the V hook (AA) through the holes on one side of the Grow
Light (A).
□ Repeat with the second V hook (AA) on the other end of the Grow
Light (A).
BB
5
Please contact 1-855-384-7754 or further assistance.
A
WWW.ETISSL.COM
Carabiner
Pulley
BB
AA