emerio HB-121207.1 Mode D'emploi page 6

HB-121207.1
PARTS DESCRIPTION
1. Safety lock button
2. ON/OFF button
3. Hand-held stick ( Motor housing )
4. Shaft
5. Blade
6. Indicator light
7. Storage base for accessories
8. Charge jack with cover
9. Charger
10. Measuring cup
Caution:
1. This device is designed to handle average amounts of food. It can be used without interruption for a
maximum of 1 minute. After that, it should be allowed to cool for 1 minute otherwise it will overheat. After
3 consecutive cycles of operation, the appliance needs to be cooled for about 40 minutes.
2. Do not use the appliance to blend very hard and/or dry foods. Do not use it to crush ice.
3. Never blend hot oil or fat.
4. Never run the appliance without load more than 15 seconds, otherwise the lifespan of the appliance may
be shortened.
BEFORE FIRST USE
1. Carefully unpack the appliance and remove all packaging material.
2. Clean the shaft and blade of your appliance in warm soapy water. Rinse and dry thoroughly before
assembling back.
INSTRUCTION FOR USE
1. Fit the shaft onto the hand-held stick; turn and lock the shaft properly (Make sure the triangle sign on the
hand-held stick is pointing at the lock sign on the shaft.)
- 5 -
EN