Celestron Regal M2 Mode D'emploi page 5

adjustment slowly rotate the fine focus knob (located
in front of the course focus knob) until the image in the
eyepiece is clear and sharp. When the focus knob will not
Lock Screw
rotate any further, turn the wheel in the opposite direction.
ROTATING TRIPOD MOUNT
The Regal M2 features a rotating tripod mount that rotates
Fig. 7a
a full 360° and allows the eyepiece to be set in any viewing
position. To change the position of the eyepiece, loosen
the lock screw located on the tripod mount and turn the
scope to the desired position (Fig 7a, 7b). Tighten the lock
screw and view through the eyepiece.
LENS SHADE AND SIGHTING GUIDE
The lens shade of the Regal M2 will slide away from the
Fig. 7b
body to protect the lens from exposure to rain or to keep
unwanted glare from entering the spotting scope and
degrading your image. A sighting guide is molded into
the lens shade rubber to aid in locating your subject and
bringing it into the field of view (Fig. 8). The location of the
sighting guide can be changed by simply rotating the lens
shade.
Fig. 8
5