Care And Storage - Celestron Regal M2 Mode D'emploi

POINT-AND-SHOOT PHOTOGRAPHY
A variety of point-and-shoot cameras can be used to
digiscope with the Regal M2 spotting scopes utilizing the
Universal Camera Adapter (#93626) offered by Celestron
(Fig. 11). This adapter attaches to the spotting scope's
eyepiece and allows the camera lens to be centered
behind the eyepiece. Please note that not all cameras
are compatible with this adapter as there is not enough
adjustment to center the lens behind the eyepiece when
the position of the lens is low in the camera body or when
the camera does not have adequate height.
WATERPROOF / FOGPROOF
The Regal M2 Series spotting scopes are waterproof and filled with dry nitrogen gas to prevent the housing
from fogging internally.

CARE AND STORAGE

Your Celestron spotting scope will provide you years of dependable service if it is cared for and stored
properly.
1. Protect the spotting scope from impact and do not force any of the moving parts beyond their limits.
2. Protect the optics of your spotting scope by putting on all lens caps when not in use.
3. Store your spotting scope in a cool, dry place whenever possible.
4. When storing for an extended period of time, place the spotting scope in a plastic bag or airtight
container with a desiccant.
8
Fig. 11