Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 5+ Serie Mode D'emploi

Connecting the Power cord and an antenna or cable connection
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause the TV to
malfunction.
Power Input
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the Clock
Mode
6
View the HD
Connection Guide.
7
Enjoy your TV.
If You Want to Rerun Plug & Play...
O
MENUm → Setup → Plug & Play → ENTERE
✎
NOTE
y To change the TV's setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button. Select the
desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
Press the ▲ or ▼ button, then press the ENTERE button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel → Auto Program (p. 14).
✎
Press the ENTERE button at any time to interrupt the memorization process.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 19).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
MENU for 5 sec.
MENU button on the TV for 5 sec.
Cable
ANT OUT
POWER
P
9
English