Cleaning the micro pressure valve
• When you clean the micro-pressure valve, remove it from the lid –
and open it by rotating it in the direction "open" –
After cleaning it, wipe it dry and connect the two parts together and
rotate it in the direction of "close", then put it back on the lid of the
multicooker –
Cleaning and care for the other parts of the appliance
• Clean the outside of the multicooker – fig.22, the inside of the lid and
the cord with a damp cloth and wipe dry. Do not use abrasive products.
• Do not use water to clean the interior of the appliance body because it
can damage the heat sensor.
fig.20a
and 20b.
fig.17
fig.18a
and 18b.
EN
29