T-Fal ACTICOOK & STIR Manuel D'utilisation page 22

PILAF/RISOTTO FUNCTION
• Press the "Menu" key to select the function "Pilaf/Risotto". The screen
displays "
• Press the "Stir" key and the "Stir" light comes on. Press it again and the
stir function turns off. If no action is taken before cooking starts, the
stirring function automatically turns off.
• Press the "Start" key. The muticooker begins the "Pilaf/Risotto" cooking
program, the "Start" light comes on and the screen flickers "
• The cooking time and temperature are determined automatically by
the appliance, depending on the number of ingredients.
• At the end of the cooking process, the multicooker "beeps" three times
and begins the keep warm program, the "Keep Warm" indicator comes
on and the screen displays the time for which the keep warm function
has been active.
RECOMMENDATIONS FOR BEST RICE COOKING (Rice and Pilaf/
Risotto functions)
• Before cooking, measure the rice with a measuring cup and rinse it
(except for risotto rice).
• Distribute the rinsed rice evenly around the whole surface of the
bowl. Fill the bowl with water to the corresponding water level (the
graduation is in cups).
• When the rice is ready and when the "Keep Warm" indicator light is
on, stir the rice and then leave it in the multicooker for a few minutes
longer in order to get perfect rice with separated grains.
Use this table below as a good guide to cook rice:
Measuring cups
2
4
6
8
10
For rice cooking, the time and temperature are automatically set.
The cooking time depends on the quantity and type of rice.
22
", and the "Start" key flashes red.
COOKING GUIDE FOR WHITE RICE – 10 cups
Weight of rice
300 g
600 g
900 g
1200 g
1500 g
Water level in
the bowl (+ rice)
2 cup mark
4 cup mark
6 cup mark
8 cup mark
10 cup mark
".
Serves
3per. – 4per.
5per. – 6per.
8per. – 10per.
13per. – 14per.
16per. – 18per.