BEFORE THE FIRST USE
Unpack the appliance
• Remove the appliance from the packaging and unpack all accessories
and printed documents.
• Open the lid by pushing the "open" button on the housing – fig.1.
Read the instructions and carefully follow the operating procedures.
Clean the appliance
• Remove the bowl – fig.2, the inner lid – fig.3 and the pressure valve –
fig.4
and 5.
• Clean the bowl, the valve and the inner lid with warm water, soap and
a sponge.
• Using a damp cloth, wipe the outside of the appliance and the lid.
• Dry off carefully.
• Put all the elements back in their original position. Install the inner lid
in the right position corresponding to the top lid of the machine. Then,
put the inner lid behind the 2 ribs and push it on the top until it is fixed
into place. Install the detachable cord into the socket on the cooker base.
FOR THE APPLIANCE AND ALL FUNCTIONS
• Carefully wipe the outside of the bowl (especially the bottom). Make
sure that there are no foreign residues or liquids underneath the bowl
and on the heating element – fig.6.
• Place the bowl into the appliance, making sure it is correctly positioned
– fig.7.
• Assemble the paddle with the bottom connector, the support ring and
the stir paddle – fig.8. Place it into the bowl – fig.9.
• Make sure the inner lid is in position correctly.
• Close the lid into place until you hear a "click".
• Install the power cord into the socket of the multicooker base and
then plug it into the power outlet. The appliance will ring a long sound
"Beep" and all the indicators on the control box will light up for an
instant. Then the screen display will show "----", and all the indicators
will switch off. The appliance then enters into standby mode and you
can select the menu functions as you wish.
• Do not touch the heating element when the product is plugged in or after
cooking. Do not carry the product when it is in use or just after cooking.
• This appliance is only intended for indoor use.
12