Using The Details Screen; Deleting All Rides From Memory; Navigating With The Cycle Trainer; Navigating With The Map - Timex Cycle Trainer 2.0 Mode D'emploi

usIng The deTaIls sCreen

In addition to viewing ride data, there are several other tasks you can perform on the details screen.
vieWing the riDe roUte
You can see the ride route on the map.
1. From the ride details screen, highlight VIEW?, then press ENTER.
The map displays indicating the route.
Press  to zoom out, or  to zoom in.
Hold ENTER to return to the ride list.
vieWing lapS
View time, distance, average speed, average pace, average heart rate, and route for individual laps.
1. From the ride details screen, highlight LAPS?, then press ENTER.
A list of laps in the ride displays. Lap data appears at the bottom of the screen.
2. To view the lap route, highlight the lap, then press ENTER.
The map displays, indicating the route.
Press  to zoom out, or  to zoom in.
Hold ENTER to return to the lap list.
FolloWing the riDe roUte
You can follow the route again either from beginning to end or from end to beginning.
1. From the ride details screen, highlight TRACK BACK, then press ENTER.
2. Highlight BACKWARD (to follow from end point to start point) or FORWARD (to follow from start point to end
point), then press ENTER.
The map displays with the route indicated. The compass arrow indicates the direction to go to follow the
route.
See Following Routes for more information.
Deleting a riDe
Remove a ride from memory if you no longer need it or to free up memory space.
1. From the ride details screen, highlight DELETE?, then press ENTER.
2. Highlight YES, then press ENTER.

deleTIng all rIdes from memorY

Instead of deleting rides individually, you can delete all rides at the same time.
1. From the main menu, highlight ACTIVITY, then press ENTER.
2. Highlight ACTIVITY INFO, then press ENTER.
3. Highlight DELETE ALL, then press ENTER.
4. Highlight YES, then press ENTER.

naVIgaTIng WITh The CYCle TraIner

The GPS on the Cycle Trainer powers both the map and the compass features to help you navigate during
rides. You can follow routes you have already recorded in Speedometer mode, or you can create waypoints
and build routes of your own from them. You can follow routes from the beginning, or from the end to get back
to your starting point.

naVIgaTIng WITh The map

The map shows your current position, waypoints in a route, a line indicating the route, a compass indicating
the direction to the next waypoint, and the distance to the next waypoint.
The map is used to follow the route of a previous ride. You can also construct custom routes.
tUrning the map on anD oFF
When the map is enabled, it appears in Speedometer mode between the Time screen and Custom screen 1.
1. From the main menu, highlight NAVIGATION, then press ENTER.
2. Highlight ADD MAP MODE (to turn on) or REMOVE MAP (to turn off), then press ENTER.
14