Brandt BFD7870NX Manuel D'instruction page 39

 The panel will be lit up by any key operation whereas the light would be out 1 minutes after the last
operation.
 Display during normal operation
 Temperature Display of the Fridge Compartment: Indicating the temperature of the current setting.
Temperature setting of fridge compartment
This key is workable both in User Defined Mode as well as Super Mode. After entering the temperature
control of the fridge compartment, this key flashes. By touching the key consecutively, the temperature
would change in a circle of "2°C, 3°C, 4°C, 6°C, 8°C", after which 5-second flashing means the
selection of temperature is settled.
Temperature setting of freezer compartment
 Plug on your appliance. The internal temperature is controlled by a sensor. There are 3 settings
COLD, COLDER, and COLDEST. COLD is warmest setting and COLDEST is coldest setting.
 The appliance may not operate at the correct temperature if it is in a particularly hot or if you open
the door often.
Power cool / Locking / Unlocking
 Power Cool: Touch this key to Enter / Exit Power Cool Mode In the state of "Unlocking"
 When enter it, the indicator
 Long Press to Enter / Exit Locking Mode
o Unlocking: Press for 3 seconds in the mode of locking, all the keys would be unlocked
after the a beep.
o Locking: Press for 3 seconds in the mode of unlocking, all the keys would be locked after
the a beep.
How to stop the product
To completely stop the appliance, you must unplug the plug from the electrical outlet.
light and Automatic exit after N operation in 3 hours.