Troubleshooting - AquaScape AQUASURGE 2000 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

troublesHooting

• Reduced Water Flow
– pump or plumbing may be clogged. it may be
necessary to clean the filter screens and impeller.
• Pump Hums and Doesn't Push Water
– pump or plumbing may be clogged. it may be
necessary to clean the filter screens and impeller.
– remove the water chamber cover and inspect
and clean the impeller rotor assembly and
internal pump body.
– Make sure nothing is blocking or wrapped
around the impeller.
– Make sure the pump is receiving the correct voltage.
– Make sure the impeller blades are not
worn or damaged.
• Pump Not Working
– the ground-fault circuit-interrupter (gfCi)
may have tripped.
– the pump is not receiving the correct voltage.
• Spare Parts Replacement
– Visit www.aquascapeinc.com to view a video tutorial
on spare parts replacement for the AquaSurge pump.
91062.052012
8
For more information about our company or products, please visit our website at www.aquascapeinc.com
or call us at (US) 1-866-877-6637 (CAN) 1-866-766-3426
©2012 Aquascape, Inc. • All Worldwide Rights Reserved
US 1-866-877-6637 |
CAN 1-866-766-3426 | www.aquascapeinc.com
Docum
Docum
Sikich G
1300 Iro
Naperv
p 630.7
f 630.71

Publicité

Chapitres

Table des Matières
loading

Table des Matières