ION Solar Sounds Guide D'utilisation page 5

Syncing multiple Solar Sounds
1. Connect your Bluetooth device to one Solar Sounds
will be the "primary" speaker.
2. Press the LINK button on the primary speaker to enter Multi-Sync
will be lit solid green, and you will hear "Multi-Sync Mode" (if voice prompts are enabled)
to indicate it is in Multi-Sync
Note: Solar Sounds
The closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync
3. Power on any other "secondary" speakers to broadcast audio to and ensure they are
disconnected from any Bluetooth devices before proceeding.
4. Press the LINK button to enter Multi-Sync
LED will begin flashing green and the secondary speakers should automatically sync to the
primary speakers.
5. Once a successful sync is established, the LINK LED on the secondary speaker will be lit
solid green, and you will hear "Synced" from the "secondary" speaker (if voice prompts are
enabled).
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is
to the "primary" speaker. See Technical Specifications for Bluetooth and Multi-Sync
ranges.
Tips:
1. Solar Sounds
To find out more, visit ionaudio.com.
2. It is recommended when using multiple Solar Sounds
your device's Bluetooth list. This will allow easy identification between the primary
and secondary speakers when connecting through Bluetooth or the ION Sound XP
app.
Remote Power & Standby
1. If your Solar Sounds
Bluetooth device is connected to the Primary speaker. The Bluetooth LED on the primary
speaker will be lit solid blue, and the LINK LED will be lit solid green.
2. Once confirmed, open the ION Sound XP
speaker connects to the app, return to the speaker library page.
3. On the Solar Sounds
once will put the primary, as well as any connected secondary speakers, into Standby
mode. Tapping the power icon again will wake up the primary speaker and any connected
secondary speakers to resume normal functionality.
Note: When the Solar Sounds
reduced. If the Standby feature is not a feature you use, it is recommended to fully power
down the speakers after each use to extend battery life. To completely power down the
speakers: press and hold the Power/Standby button on the speaker. This is also
recommended before storing the speakers for extended periods of time.
TM
Speakers:
TM
mode.
TM
speakers should be within 50' (15 m) of each other to properly sync.
TM
mode, double-press the LINK button again.
TM
can sync audio with other Multi-Sync
TM
Speakers have been paired in Multi-Sync
TM
listing, you will see a Power button icon. Tapping the power icon
TM
speaker(s) are in Standby mode, battery life is slightly
TM
speaker using the steps above. This
TM
mode for the secondary speakers. The LINK
TM
-compatible ION Audio speakers.
TM
TM
app and select Solar Sounds. Once the
TM
mode. The LINK LED
to rename the speakers in
TM
Mode, make sure your
TM
TM
5