ION Solar Sounds Guide D'utilisation page 3

Features
2
1
1. STANDBY Button: Press and hold this button to fully power Solar Sounds
Quickly press and release this button to put Solar Sounds
it up. See Operation > Remote Power & Standby
Double-tap this button to turn Voice Prompts on or off.
2. Charging LED: This LED will be solid red when the battery is charging and will turn off
if the battery is fully charged or if no adapter is connected.
3. Bluetooth Button: Press and hold this button to disconnect a paired Bluetooth device.
For more information on pairing a Bluetooth device, see
Connecting with Solar Sounds
4. Bluetooth LED: This blue LED will flash when searching for a Bluetooth device. The
LED will be lit solid when a successful connection is made.
5. LINK Button: Press this button to enter Multi-Sync
compatible speakers. See
more information on Multi-Sync
6. LINK LED: This green LED will be lit solid on the "primary" speaker when the speaker
is in Multi-Sync
with the primary speaker. See
TM
Sounds for more information on Multi-Sync
7. Power Input: Connect the included power adapter here to charge Solar Sounds
8. Reset button: If Solar Sounds
power button. If this doesn't work, shutdown the unit by gently pushing a narrow object
into the Reset hole located here.
4
3
TM
.
Operation > Bluetooth Connecting with Solar Sounds
TM
Mode.
TM
Mode. The LED will flash green on a secondary speaker while it pairs
TM
is working abnormally, reboot Solar Sounds
6
5
for more information.
Operation > Bluetooth Connecting with Solar
TM
Mode.
7
TM
in Standby Mode or wake
Operation > Bluetooth
TM
Mode to pair with additional
8
TM
on or off.
TM
for
TM
.
TM
using the
3