Deleting links
5
6
7
Further information on how to disconnect devices
that have been programmed for each other can
be found in the 6701 EB operating instructions.
Pos: 9 /Fuer alle Dokumente/Seitenwechsel @ 0\mod53_1.doc @ 1171
After a successful deleting process,
the LED starts to flash again.
If the deleting process is not
successful (the LED continues to
light permanently), set the selector
switch of the Busch-Watchdog
again to "E" and repeat the process.
Select the operating mode "R" or
"S" on the receiver 6701 EB or
train another watchdog.
Select the operating mode "ES" or
"GS" on the Busch-Watchdog
ENG
®
®
.
64