Busch-Jaeger Busch-Wachter 220 WaveLINE Manuel D'utilisation page 62

Training the devices
5
6
7
Further information on how to disconnect devices
that have been programmed for each other can
be found in the 6701 EB operating instructions.
After a successful programming, the
LED starts to flash again.
If the programming is not successful
(the LED continues to light
permanently), set the selector switch
of the Busch-Watchdog
"P" and repeat the process.
Select the operating mode "R" or "S"
on the receiver 6701 EB or train
another watchdog.
Select the operating mode "ES" or
"GS" on the Busch-Watchdog
ENG
®
again to
® .
62