Bimar HC506 Notice D'instructions page 28

The device can also be
paired using the "AP Mode".
Press the top right button,
hold down the
button on the control panel
until the light "
quickly, access the smart
phone WI-FI settings and
connect to the "Bimar Live
Smart xxx" or "Smart Life
xxx" network, then press
"connect now".
2.11 In the next screen, "Set Wi-Fi" (see below), type the PASSWORD of your Wi-Fi network and
click the "confirm" symbol to activate the connection. The countdown (see below) starts
and will be interrupted as soon as the smartphone has connected to the device.
2.12 The first screen reappears with the added option "CONVECTION HEATER" (see right); click
"DONE" to activate the heater.
The device can also be shared with other users. (See next section: Description of convection
heater control panel or Use via smartphone)
If the above operations do not proceed correctly, the appliance must be reset by
disconnecting the plug from the power socket and leaving the appliance disconnected for
ON-OFF
" flashes
28