Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Important
Failed Overclocking Resolution
This mainboard supports overclocking greatly. However, please make sure your pe-
ripherals and components are bearable for some special settings. Any operation that
exceeds product specification is not recommended. Any risk or damge resulting from
improper operation will not be under our product warranty.
Two ways to save your system from failed overclocking...
•
Reboot
Press the Power button to reboot the system three times. Please note that, to avoid
electric current to affect other devices or components, we suggest an interval of more
than 10 seconds among the reboot actions.
At the fourth reboot, BIOS will determine that the previous overclocking is failed and
restore the default settings automatically. Please press any key to boot the system
normally when the following message appears on screen.
Warning !!! The previous overclocking had failed,
and system will restore its defaults setting,
Press any key to continue.......
•
Clear CMOS
Please refer to "how to clear CMOS data" section for more information about how to
clear CMOS data.
En-47
Publicité
Table des Matières
