MSI XPower Serie Mode D'emploi page 53

▶ Intel VT-d
This item is used to enable/disable the Intel Virtualization Technology for Directed
I/O (VT-d). For further information please refer to Intel's official website.
▶ Active Processor Cores
This item allows you to select the number of active processor cores.
▶ Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the microprocessor whether the computer is running on battery or AC power. This field
will appear after you installed the CPU which supports speedstep technology.
▶ C1E Support
To enable this item to read the CPU power consumption while idle. Not all processors
support Enhanced Halt state (C1E).
▶ Intel Turbo Boost
This item will appear when you install a CPU with Intel Turbo Boost technology. This
item is used to enable/ disable Intel Turbo Boost technology. It can scale processor
frequency higher dynamically when applications demand more performance and TDP
headroom exists. It also can deliver seamless power scalability (Dynamically scale up,
Speed-Step Down). It is the Intel newly technology within i7 CPU.
▶ Adjust CPU Base Frequency (MHz)
This item allows you to set the CPU Base clock (in MHz). You may overclock the CPU
by adjusting this value. Please note the overclocking behavior is not guaranteed.
▶ OC Stepping
This item will be enabled after you set the overclocking frequency in the "Adjust CPU
Base Frequency (MHz)". And the following items will appear. This items will help the
system to overclock step by step after system booting up.
▶ Start OC Stepping From (MHz)
This item is used to set the initial base clock. The system will boot with the initial base
clock, and start to overclock from initial base clock to set base clock that you set in
"Adjust CPU Base Frequency (MHz)" step by step.
▶ OC Step
This item is used to set how many steps for base colck overclocking.
▶ OC Step Count Timer
This item is used to set the buffer time for every step.
▶ Adjust CPU Ratio
This item allows you to adjust the CPU ratio.
▶ Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Ratio). Read-only.
▶ OC Genie Button Operation
This item is used to enable/ disable the OC Genie button function.
En-43