Cleaning And Disinfecting The Wet/Dry Vac - Workshop WS0600SS0 Mode D'emploi

MAINTENANCE (continued)
Cleaning and Disinfecting
the Wet/Dry Vac
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
To clean the drum:
1. Dump debris out.
2. Wash drum thoroughly with warm
water and mild soap.
3. Wipe out with dry cloth.
Before prolonged storage or as needed
(i.e., waste water pick up) the drum
should be disinfected.
To disinfect the drum:
1. Pour 1 gallon of water and 1 teaspoon
chlorine bleach into the drum.
2. Let solution stand for 20 minutes,
carefully swishing every few minutes,
making sure to wet all inside surfaces
of the drum.
3. Empty drum after 20 minutes. Rinse
with water until bleach smell is gone.
Allow drum to dry completely before
sealing the motor on the drum.
Storage
Before storing the Vac, empty and clean
the dust drum. Wrap the power cord
around the carry handle. Keep acces-
sories in the same area as the Vac so
that they are readily available. Store the
Vac indoors.
If the power cord is damaged, it must be
replaced by the manufacturer or their
service agent or by similarly qualified
personnel to reduce the risk of accident.
Casters
If your casters are noisy, you may put a
drop of oil on the roller shaft to make
them quieter.
WARNING: To assure product
SAFETY and RELIABILITY, any other
servicing or repairs and adjust-
ments should be performed by
Authorized Service Centers, always
using WORKSHOP replacement
parts.
14
Carry Handle
Cord
Cord Wrap
Area