TFA 38.2030 Mode D'emploi page 6

TFA_No. 38.2030 Anleit_11_21
Stop watch
Caution!
Risk of injury!
• Keep this device and the battery out of reach of children.
• Small parts can be swallowed by children (under three years
old).
• Batteries contain harmful acids and may be hazardous if swal-
lowed. If a battery is swallowed, this can lead to serious inter-
nal burns and death within two hours. If you suspect a battery
could have been swallowed or otherwise caught in the body,
seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to pre-
vent damage caused by leaking.
• Make sure the polarities are correct. Remove the battery if the
device will not be used for an extended period of time.
• Avoid contact with skin, eyes and mucous membranes when
handling leaking batteries. In case of contact, immediately
rinse the affected areas with water and consult a doctor.
Important information
on product safety!
• Do not expose the device to extreme temperatures, vibrations
or shocks.
• Protect it from moisture.
5. Setting
Changing the mode: (Press MODE button)
• Normal mode – stop watch mode – alarm setting mode – time
setting mode
5.1 Setting of the clock and calendar
• Press the MODE button three times while in normal mode to
enter the time setting mode.
• The indication of the seconds and the day-of-the-week flash.
• Press the START/STOP button to set the seconds to zero.
10
22.11.2021 17:17 Uhr
Stop watch
• Press the LAP/SET/RESET button to select the minutes, hours,
day, month and day of the week and set them with the START/
STOP button.
• Please note that during the setting of the hours at first , A, P
and then H appear.
• With regard to the 12 hour system, A (in the morning) or P (in
the afternoon) appears on the display.
• In the 24 hour system, H appears on the display.
• Press the MODE button to confirm the settings.
• The display shows the current time and the icon of the week-
day is highlighted.
• Press the START/STOP button while in normal mode to switch
between time and date.
5.2 Alarms
Alarm clock function
• Press the MODE button twice while in normal mode to enter
the setting mode for the alarm time.
• The icon of the hour and the day-of-the-week start flashing.
• Press the START/STOP button to set the hours.
• The alarm symbol appears on the display.
• The alarm is activated.
• Press the LAP/SET/RESET button.
• The minute digits are flashing.
• Press the START/STOP button to adjust the minutes.
• Press the MODE button to confirm the settings.
• The current time appears on the display, the alarm symbol and
the icon of the day-of-the-week is highlighted.
• When the alarm time is reached, the alarm will ring.
• If the alarm is not stopped with the LAP/SET/ RESET button,
the alarm sound will automatically turn off after a few seconds
and will be reactivated at the same time.
• Press the START/STOP button and the snooze function will be
activated. The alarm sound will be reactivated after 5 minutes.
• Press the LAP/SET/RESET and the START/STOP buttons at the
same time to activate/turn off the alarm function.
• The alarm symbol appears/disappears on the display.
• Press the LAP/SET/RESET button while in normal mode to
change between the time and the alarm time.
Seite 6
11