RZ_Wasserzuführgerät_980044-00_Text_EN_Wasserzufuehgeraet 19.10.17 15:58 Seite 17
NOTE!
Observe the national regulations concerning occupational safety which apply to the place of
operation as well as the applicable national regulations for operations. An expert inspection must
be performed – ideally by the maintenance service of the manufacturer – to establish whether
hazard-free operation remains possible. This should be performed in the event of defects that
may impair safety in particular, and must be performed at least every 5 years in any case.
Only use original GLORIA spare parts for repairs (see GLORIA spare parts shop
https://shop.gloriagarten.de).
Repairs must only be carried out by a GLORIA service point.
7.3 Storage >>
ATTENTION
device. You must therefore store the device out of the reach of children.
Empty and clean the device as in Chapter 7.1.
8
Problems with the device
Fault
Device is leaking at the
screw connection
Pump does not build
up any pressure
9
Disposal & Legislation
9.1 Environmental protection & disposal of the device >>
arated according to the different materials and disposed of at a recycling collection point. The
materials can be recycled according to their designations.
Please check with your local government to find the appropriate disposal point.
Empty the device before disposal and render it unusable.
9.2 Disposal of packaging >>
environment ally- suitable and disposal-related aspects and are therefore recyclable.
Returning the packaging to the material circulation saves raw materials and reduces the level of
waste. Please dispose of unwanted pack aging materials according to applicable local regulations.
figure
18
You may be exposed to hazards that could injure you when handling the
Cause
Hose loose
collar on piston is
worn
The packaging materials have been selected according to
Remedy
Tighten coupling nut
and carry out pressure
test with water
Replace collar
17
The device must be sep-