RZ_Wasserzuführgerät_980044-00_Text_EN_Wasserzufuehgeraet 19.10.17 15:58 Seite 15
2.2 Health hazards >>
CAUTION
.
device. Always comply with the following safety information/safety measures:
Changes or improvements to the device are not permitted without the agreement of the
manufacturer! Never bypass, modify or remove the safety equipment.
2.3 Danger due to damage to equipment >>
cause damage to the device! For this reason, observe the following safety instructions:
3
Before using the device
3.1 Delivery status >>
A Safety/vent valve
B Pump
C Filling funnel
D Adapter for hose connection
E Schlauchleitung
F Fill level indicator
G Base
H 1 x user manual and product information (not shown)
4
Technical data
Type:
Item no.:
Max. capacity:
Total tank capacity:
Max. operating pressure : 3 bar
Max. operating temp.:
Full pressure change
0 bar to 6 bar:
Tank material:
Empty weight:
You may be exposed to hazards that could injure you when handling the
The device must not be pressurised for extended periods.
Do not store the device in livestock buildings due to the ammonia vapours (dan-
ger of brass cracking), do not fill with solutions containing nitrogen or phosphates.
The device is shipped as standard as follows
Water feeding device Type 10
1215.0000
10 L
12.2 L
0°C to +40°C
max. 5000 load cycles
Polyethylene
2.17 kg
ATTENTION
15
Improper
use
can
(see figure on page 2):