Publicité
Instruction Leaflet IL040047EN
Effective January 2022
Installing the IP00 drive module into the cabinet
Installing the FR7 or FR8 IP00 drive module without
the options module
We recommend that you install the IP00 drive module
Step 1:
on rails inside the cabinet.
A. Support/fixing bracket
Step 2:
Use fixing points to attach the IP00 drive module into
the cabinet. See the locations of the fixing points on
.
Page 5
8
EATON
www.eaton.com
PowerXL FR7 and FR8 Series VFD
Installing the FR7 or FR8 IP00 drive module with
the options module
The drawing below shows a recommended installation of the IP00
drive module with an options module into the cabinet.
Step 1:
Use the fixing points at the front of the drive.
A. Front fixing points
B. Fixing points of the options module. These are important for a
B.
safe maintenance if the IP00 drive module is removed.
Use the fixing points at the rear of the drive.
Step 2:
A. Rear fixing points
Publicité
