Canon imageRUNNER iR3045 Guide D'utilisateur page 81

# 860
Cause 1 A paper jam occurred during printing.
Remedy Try printing again.
Cause 2 Recovery printing was not performed.
Remedy Try printing again.
Cause 3 You tried to print on a transparency sheet made for color copies.
Remedy Load transparencies made for black-and-white copies into the machine and then try printing
again.
# 861
Cause 1 An error occurred while processing PDL data or image data.
Remedy Confirm the print settings you made when printing from a computer.
Cause 2 Color data was sent from the external controller to the billing device as monochrome data.
Remedy Change the print data or print settings, and try printing again.
# 862
Cause 1 The saddle finisher trays have exceeded their stacking limits. (See Chapter 9, Appendix, in
the Reference Guide.)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings which is not supported was set.
Remedy Change the print data or print settings, and try printing again.
Cause 3 Image data or data which is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
List of Error Messages
3
3-13