Siemens SITRANS FUE1010 IP40 NEMA 1 Guide Rapide page 22

Commissioning
3.2 Setting the Parameters
3. Press <ENT> to create Site name (e.g., ABC). (See figure below.)
4. Scroll to [Save/Rename Site]. Press <Right Arrow> then press <ENT> to save site.
5. Press the <Left Arrow> and return to the main menu.
Select Pipe Class
1. Press the <Right Arrow> to select Pipe Class. Press <Right Arrow> again and scroll to
2. Press <ENT> to select.
3. Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. Press
4. Press the <Left Arrow> and return to the main menu.
20
Note
To set English or Metric units: In the Meter Type menu, scroll to Meter Facilities Menu.
Press <Right Arrow> and select desired units. Press <ENT> to select. Press <Left Arrow>
and <Up Arrow> to return to Meter Type menu.
Note
To select letters: Press <Right Arrow> to cursor and then press <Up/Down Arrow> to
select letters and numbers. Press <ENT> when done.
①
Insert desired name (8 characters max.)
desired Pipe Class.
<Right Arrow> and scroll to desired pipe size. Press <ENT>. Enter dimensions manually if
pre-programmed dimensions do not match application.
FUE1010 IP40 (NEMA 1) Energy Portable
Compact Operating Instructions, 5/2009, A5E02384186-03