emerio HV-112906 Mode D'emploi page 8

2) Press down the locking clip on the dust cup to empty dust from the container.
2. How to clean the dust cup filter:
1) Press the dust cup release button to remove the container from the main unit.
2) Detach the upper part from the dust cup.
3) Take out the HEPA case first, and then take out the HEPA filter.
4) Rinse them in water, and then air dry completely before placing them back in the dust cup. AIR DRY ONLY.
Note:
(1) Clean the dust cup filter every two weeks or so (depending on usage).
(2) To ensure peak performance of the appliance, if the HEPA filter cannot be well cleaned or the suction of the
appliance is decreasing, it is the time to replace the HEPA filter.
(3) The HEPA filter protective net cover is used to protect the HEPA filter from blocking. Make sure it is in place
when placing the HEPA filter back into the HEPA case.
3. How to clean the AnimalPro brush
1) Unlock the AnimalPro brush from the floor brush. Take it out and remove any dirt (hair and other fibers)
tangled around the roller.
2) Wash the brush under running water with mild detergent. Make sure that it is completely dry before replacing
it.
TECHNICAL DATA: DC 22.2 V
- 7 -