emerio HV-112906 Mode D'emploi page 7

2. Insert the extension tube into the suction hole opening; make sure it fits firmly. (fig.B)
3. Attach the floor brush to the other side of the extension tube. (fig.C)
Note: There is a lock (1) on bottom of floor brush to fix the AnimalPro brush (2). Make sure it's locked in place
for use.
4. If you want to use the attachment long crevice nozzle or 2 in 1 crevice nozzle, attach it to the suction hole
opening directly or to the other side of the extension tube instead of the floor brush according to your own
desire.
5. Press the speed button to turn on the appliance.
Press the speed button once: low speed;
Press the speed button twice: high speed;
Press the speed button thrice: off.
NOTE: During use, please pay attention to the dust capacity and do not exceed the "MAX" level indicated on
the dust cup. This appliance is for dry suction only.
Caution: The suction hole opening must be open and free of any obstructions at all times. Otherwise, the motor
will overheat and could become damaged.
CLEANING AND MAINTENANCE
1. Except for the main unit, other parts can be cleaned in warm soapy water (<40℃). Rinse and dry them
completely before reassembly. Do not immerse the main unit in water or any other liquids.
2. Use only a soft moist cloth to clean the outside of the main unit. Do not allow any kind of liquid to enter the
main unit.
3. Do not use aggressive chemicals or abrasives.
4. Do not use the device if the filter is broken or worn out.
5. The unit does not contain parts serviceable by you, do not disassemble it and do not try to repair it yourself.
1. How to empty the dust cup:
1) Press the release button to take out the extension tube;
- 6 -