Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PRODUCT USAGE
ASSEMBLING THE FOOD GRINDER ATTACHMENT
1
Insert the Grind Screw into the Main
Housing securely.
3
Tab
Notch
Place the desired Grinding Plate over the
Blade, matching the notch of the plate with
the tab on the bottom of the Main Housing.
ASSEMBLING THE SLICER/SHREDDER ATTACHMENT
1
Unplug and turn the Stand Mixer off (0).
W11373925A.indb 5
2
Sharp Side
Place the Blade over the end of the Grind
Screw.
4
Place the Collar on the Main Housing,
turning clockwise by hand until secured but
not tightened.
2
Slide the blade you want to use into the
housing. You will hear a click when the blade
snaps into place properly on the drive shaft.
5
7/18/2019 12:41:32 PM
Publicité
Table des Matières
