Publicité
Les langues disponibles
Les langues disponibles
Snap the lens cover (B) onto the fixture body (A).
9
Restore the power to the electrical box.
Turn on the light switch to activate the fixture.
LIghT DISTrIbuTION
-/+180
-150
-120
0
-90
300
600
-60
900
1200
-30
1500
0
AVERAGE BEAM ANGLE(50%):113.1 DEG
warninG: Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire,
or other injuries which could be hazardous or even fatal. • Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker. •
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Minimum 90°C supply conductors. • Risk of electrical shock. To reduce the possibility of serious injury, always take the proper precautions and unplug the fixture before moving or
cleaning.
notiCe: Suitable for operation in ambient temperatures not exceeding 113°F/45°C.
notiCe: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: Reorient or relocate the receiving antenna, increase the separation between the equipment and the receiver, connect the equipment
into an outlet on a circuit different from that to which the receiver is connected, and consult the dealer or an experienced radio/TV.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
See website for Warranty, Troubleshooting or Care and Cleaning details at www.ETiSSL.com.
Questions, problems, missing parts? Call ETiSSL Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday
150
120
90
60
UNIT:cd
C0/180,116.8
C30/210,115.5
30
C60/240,111.2
C90/270,109.2
1-855-eTI-SSLI (1-855-384-7754) www.eTiSSL.com
A
B
Publicité
