Robert Juliat ZEP 660SX Manuel page 9

Daisy chain :
DMX Console
Integrated terminal plug:
If no XLR connector is detected on DMX OUT connector, a 120Ω terminal plug is automatically
activated. Additional terminal plug on the last unit is not necessary.
•
Protocol: Wireless Solution W-DMX
•
Refer to the OEM User's manual for general recommendations
and use of the transmitter :
http://www.wirelessdmx.com
•
The antenna must be clearly visible from the transmitter
Refer to RJ-LED Software manual for activation procedure
•
(page EN-17)
•
Do not connect a DMX IN data cable in case of wireless DMX
use
•
In case of protocol errors, the wireless DMX is automatically
deactivated. To activate the wireless DMX again, disconnect the
DMX IN data cable, and then switch the unit off and on.
DMX mode:
The first unit receives the DMX signal via the wireless network, then all the other units are
connected to the first one via DMX data cable
Wireless DMX option
TM
EN -7-
Maximum:
32 units
Maximum:
32 units
EN