Description Of Symbols - Silverline 817089 Mode D'emploi

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Wear protective shoes
Wear protective clothing
Caution!
Be aware of kickback!
Warning: Sharp blades or teeth!
DO NOT use in rain or damp environments!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Dust extraction required or recommended
WARNING: Moving parts can cause crush and cut injuries
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authority or retailer for recycling
advice.
Conforms to relevant legislation and safety standards.
4
Original Instructions
Technical Abbreviations Key
V
Hz
~, AC
, DC
A, mA
W, kW
n
0
/min or min
-1
n
Specification
rpm
°
dB(A)
Ø
m/s
2
Specifications
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220-240V~ 50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600W
No. load speed:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-5000min
Cutting disc diameter: . . . . . . . . . . . . . . . . . . . . . . . . . Ø150mm segmented blade
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (segment dimension: 34 x 2.0 x 7mm)
Max operating speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80m/s
Cutting disc bore: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ø22.2mm
Cutting depth: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-42mm
Cutting width:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 19 and 29mm
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power cable length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2m
Dimensions (L x W x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260 x 255 x 207mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.3dB(A)
PA
Sound power L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105.3dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB
Weighted vibration a :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.681m/s
h
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Volts
Hertz
Alternating current
Direct current
Ampere, milli-Amp
Watt, kilowatt
No load speed
Operations per minute
Rated speed
Revolutions per minute
Degrees
Decibel sound level (A weighted)
Diameter
Metres per second squared (vibration magnitude)
-1
2
2