Battery Pack - Festool CT-F I Notice D'utilisation

► Open the battery compartment
closure.
► Replace the battery.
► Close the battery compartment.
6.3

Battery pack

Connecting the battery pack to the mo­
bile dust extractor
► Activate the mobile dust extractor's
automatic mode (see the operating
instructions for the mobile dust ex­
tractor).
► If you have used the cordless power
tool already, ensure that the battery
pack's capacity indicator has gone
out so that you can connect it (in cer­
tain cases, this can take a few sec­
onds).
► Press the connection button on the
mobile dust extractor [2-1] or on the
remote control [1-1] once.
The LED on the mobile dust extractor
shows a slowly rotating flashing blue
light and the mobile dust extractor is
ready for connection for 60 seconds.
► Switch on the cordless power tool.
The mobile dust extractor starts up and
the battery pack is connected until the
mobile dust extractor is manually
switched off.
If a second battery pack is con­
nected to the mobile dust ex­
tractor, the connection to the
first battery pack is lost.
English
33