JVC KD-AR880 Manuel D'instructions page 32

Category Indication
Clock Disp *
1
Clock display
Clock Hr
Hour adjustment
Clock Min
Minute adjustment
24H/12H
Time display mode
Clock Adj * 2
Clock adjustment
Time Zone *
2,
Time zone
DST * *
2, 3
Daylight savings
time
Scroll *
4
Scroll
Dimmer
Dimmer
From – To *
Contrast
Contrast
*
1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "Off" to
save the car's battery.
* 2 Displayed only when SIRIUS Satellite radio or XM Satellite radio is connected.
*
3 Adjustable only when "Clock Adj" is set to "Auto." Press number button 1 (
* 4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
5 Adjustable only when "Dimmer" is set to "Time Set."
32
Item
( : Initial)
• On : Clock time is shown on the display at all times when the
• Off : Cancels; pressing D DISP will show the clock time for about
1 – 12AM/ : Initial: 1 (1:00AM), [6].
1 – 12PM
(0 – 23)
00 – 59 : Initial: 00 (1:00AM), [6].
• 12Hours : See also page 6 for setting.
• 24Hours
• Auto : The built-in clock is automatically adjusted using the clock
• Off : Cancels.
* : Select your residential area from one of the following time zones for clock
3
adjustment.
Alaska, Pacific, Mountain, Central, Eastern, Atlantic, Newfound
• On : Activates daylight savings time if your residential area is
• Off : Cancels.
• Once : Scrolls the track information once.
• Auto : Repeats scrolling (at 5-second intervals).
• Off : Cancels. (Holding D DISP can scroll the display regardless of
• Auto : Dims the display when you turn on the headlights.
• Off : Cancels.
• On : Dims the display and button illumination.
• Time Set : Set the timer for dimmer, [34].
5 — : Initial: 6PM – 7AM.
1 – 10 : Adjust the display contrast to make the display indications
Initial: 5
Setting, [reference page]
power is turned off.
5 seconds when the power is turned off, [6].
data provided via the satellite radio channel.
subject to DST.
the setting.)
clear and legible.
) to show the setting display.