Wireless Flash Photography: Optical; Wireless Settings - Hahnel MODUS 600RT MKII Manuel D'instructions

4
This product is compatible with Nikon Creative
Lighting System (CLS). It can function as either optic
wireless master or slave flash. As a master unit, it can
control Nikon Speedlight's e.g. SB-900, and SB-910
via wireless. As a slave unit, it can be controlled by
wireless signals of Nikon Speedlight's e.g. SB-910
and pop-up flash commanders of Nikon cameras e.g.
D7100/D7000/D800
• You can set up one, two or three slave groups for i-TTL
II autoflash shooting. With i-TTL II autoflash, you can
easily create various lighting effects.
• Any flash settings (of flash exposure compensation,
high-speed sync, FE lock, FEB, manual flash, Multi
flash) on the master unit will be automatically sent to the
slave units. So the only thing you need to do is to set
the master unit to i-TTL mode without any operation for
the slave units at all during the shooting.
• This flash can work in i-TTL autoflash, M manual flash,
and Multi stroboscopic flash modes when set as a
master unit.
Positioning and Operation Range
SLAVE
MASTER
• Even with multiple slave units, the master unit can control
all of them via wireless.
• In this user manual, "master unit" refers to the speedlight
attached to the camera and "slave unit" will be controlled
by the master unit.

Wireless Settings

You can switch between normal flash and wireless flash.
For normal flash shooting, be sure to set the wireless
setting to OFF
34
Wireless Flash
Optical Transmission
Indoors
Outdoors
Photography:
10m(32.8ft)
80°
8m(26.2ft)
15m(49.2ft)
12m(39.4ft)
Modus 600RT