Hahnel MODUS 600RT MKII Manuel D'instructions page 29

Modus 600RT
2. Slave Unit setting
• Set the slave Modus
600RT to <
setting (Page 26)
3. Position of camera
and speedlight
• Position the camera
with the master unit
attached and the Modus
slave within radio range
4. Set the Group
mode to <i-TTL>
• Check that group <
> is set to <i-TTL>. If
not press <
button until <i-TTL> is
displayed
• Check that the slave
unit is set automatically
to <i-TTL> by the
master unit
5 Check Master/Slave
units are ready
• Check master
speedlight, ready
indicator is lighting and
that the slave flash
ready indicators are
blinking
6 Check the Master
slave speedlight
operation
• Press the master unit's
< > test button
• The slave speedlight
will flash. If it does not
fire, check the position
or distance of slave
from master
• You are now ready to
take a photo with the
wireless flash lighting
>
SLAVE
flash
A
A
>
MODE
29