Before The First Use - Kalorik EPCK 44847 BK Mode D'emploi

PARTS FUNCTION
Steam release knob:
Removable cooking
pot:
Silicon gasket:
Gasket holding ring:
Dew collector
Control panel functions
There are 8 presets in addition to a Delay time and a DIY setting. More
details about each preset are presented in the Settings table.

BEFORE THE FIRST USE

• Remove all packing materials and literature.
• To remove the lid, hold the handle, turn in a clockwise direction,
and lift off.
• Wash all removable parts and accessories in warm, soapy water.
Rinse and dry all parts thoroughly.
• Wipe the outer housing with a clean damp cloth.
• Make sure the silicon gasket is properly fitted on the gasket holding
ring.
• Place the gasket holding ring into the underside of the lid. It will only
fit in one way.
www.KALORIK.com
Should be set to the 'Pressure' position before
using the unit, for the cooker to build pressure.
Set to the 'Release' position to release the
pressure manually or to cook without pressure.
4L/4.2qt capacity non-stick coated
removable pot, provides even heat
distribution.
Creates the air-tight seal needed for the
pressure cooker.
Holds up the silicon gasket.
Collects any condensation on the lid or the
sides of the pressure cooker
:
7
EPCK 44847 - 180330