Where To Use; How To Replace The Filters; Reset The Filter Indicator - Oransi Erik Guide De L'utilisateur

Where to Use.

Always operate indoors, preferably on a level surface. Two of the casters
have a wheel lock to hold it in place.
If used in the home, we recommend operating the unit wherever you spend
most of your time – typically a bedroom or living area. Set the fan speed to
a noise level that is comfortable for you. In most cases you can run the air
purifier on a very low fan speed setting so it is quiet. If you have a larger
living area you may want to run it on a higher fan speed when you are not in
the room and then run it on a low speed when you are present.
Since the air is pulled in from the top and exits from the sides and bottom,
you can place anywhere in a room. We recommend keeping it at least 6
inches from a wall. Do not place where curtains or drapes can block the air
intake.
3. Replacing Filters.

How to Replace the Filters

Follow the steps in section 2 to remove the cover and access the filters.
Most filter changes will simply be a replacement of the pre-filter. All of our
used filters can be placed directly in the trash.
Reset the Filter Replace Indicator
Press and hold the Filter Reset button beneath the flashing light for a few
seconds. The light will turn off and the filter counter will reset.
Ordering Replacement Filters
Visit us at oransi.com or contact our customer service team at 888-281-
3948.
12