Carbon Filter Kit - Oransi Erik Guide De L'utilisateur

Setting up with a main Carbon Filter.
To install the carbon filter kit:
1. Unlatch 2 front and 2 rear latches of the cover.
2. Lift the cover straight up by the carrying handles and set to the
ground.
3. Remove the HEPA Filter bracket. This is not used with the large
carbon filter but should be kept if you intend to use the large HEPA
filter in the future. If you do not see it, this bracket is resting at the
bottom of the housing.
4. Insert the 2" deep white pleated post filter.
5. Insert the Carbon Filter bracket into the housing.
10