Step 2 - Attach Post To Support Brackets; Step 3 - Load Cylinder Housing Onto Post; Step 4 - Attach Reflector Studs To Screen Cover; Step 5 - Attach Head Assembly To Post - Uberhaus 70005028 HSS-A-GH Guide De L'utilisateur

.
.
Step 2 – Attach Post to Support Brackets
Install Post onto three Support Brackets.
Attach Post to Support Brackets using six large bolts
& six flange nuts.
6 Large Bolts
6 Small Flange Nuts
Fully tighten all screws.
.
.
Step 3 – Load Cylinder Housing onto Post
Load Cylinder Housing onto Post.
Slide Cylinder Housing down.
.
Step 4 – Attach Reflector Studs to Screen Cover
Insert 3 Reflector Studs & 3 Flat Washers.
Tighten studs securely.
3 Reflector Studs
.
Step 5 – Attach Head Assembly to Post
Screw off 4 small bolts.
4 Small Bolts
Head Assembly
3 Large Flat Washers
5