auna multimedia 10026947 Mode D'emploi page 19

FM Display Modes
The bottom line of the FM radio display is also an information display.
• Press INFO repeatedly to change the information displayed.
The FM information display options are shown below.
You can store up to 10 of your favorite stations as presets on both the DAB and FM bands. This will enable you to access
your favourite stations quickly and easily.
Saving Preset Stations
• Tune to the station you want to save.
• Press and hold PRESET
The Preset Store display will be shown
• Press  or  to choose a preset location to store the station.
• Press ENTER to confirm.
The display will confirm that the preset is stored.
• Re-tune to more of your favourite stations and follow the steps above
to store up to presets on each band.
Radio Text
The broadcaster can include a scrolling text that displays information about the current
programme.
Programme Type
This describes the "Style" or "Genre" of music that is being broadcast e.g. "Rock" or
"Classical".
Signal Strength
The display will show a slide bar indicating the signal strength: the stronger the signal,
the longer the bar will be from left to right.
Time/Date
The broadcaster (radio station) provides time and date information automatically
so there's no need to manually set this information.
Frequency
The frequency of the present station will be displayed, such as "90.30MHz".
Audio Mode
When in FM mode, the display will show if the station being received is in Mono or Auto
modes. In Auto mode the receiver will automatically switch between Stereo and Mono
reception. You can however override this function, so that you can manually switch to
Mono mode, which is helpful if you're listening to a station with a weak FM signal
DAB and FM Station Presets
19