auna multimedia 10026947 Mode D'emploi page 17

Browsing Stations
• Press  or  to browse up or down the station list for the station you want.
Secondary Services
A > symbol after the name of a station indicates there are secondary services available for that station. These second-
ary services are related to the primary station, e.g. a sports station may want to add extra commentaries.
The secondary services are inserted directly after the primary station in the station list.
• To select a secondary station, browse to the secondary service you want, then press ENTER to select it.
A > symbol is displayed before the station name if a station is a secondary service.
If the secondary service ends, the unit will automatically switch back to the primary station.
DAB Scanning
You can perform a Full Scan or Quick Scan at any time to scan for new DAB stations. The stations will be added to your
station list.
A Full Scan will scan all DAB bands, a Quick Scan will scan only the bands in your area.
• While listening to DAB radio, press SCAN to start a Quick Scan or press and hold SCAN to start a Full Scan.
The scan will take a few minutes. While the scan is running, the scan progress will be shown on a bargraph and the
number of stations found will be displayed
When the scan finishes, the radio will play the first station in the sequence.
DAB Display Modes
The bottom line of the DAB radio display is the information display.
• Press INFO repeatedly to change the
information displayed.
The DAB information display options are shown
DLS (Dynamic Label Segment)
Dynamic Label Segment is a scrolling message that the broadcaster may include
with their transmissions. The message usually includes information, such as programme
details etc.
Programme Type
This describes the "Style" or "Genre" of music that is being broadcast e.g. "Rock" or
"Classical".
below
17